You are here: Home > Studs
Choose a sub category:
Big Shot - Large Head Trail Studs Hedgehog - Trail Studs
Warthog XZP - Trail Studs Terminator 7mm - Race Studs
Terminator 5/16" - Race Studs
Sort By:
Page of 4
Hedgehog Carbide Tipped Trail Studs - H81C (7/8" lug track)
Hedgehog Carbide Tipped Trail Studs - H81C (7/8" lug track)
Our Price: $1.10

Snowstuds By Accord Hedgehog Studs - H81C (for 3/8" over a 7/8" lug height track)
Hedgehog Carbide Tipped Trail Studs - H82C (1" lug track)
Hedgehog Carbide Tipped Trail Studs - H82C (1" lug track)
Our Price: $1.10

Snowstuds By Accord Hedgehog Studs - H82C (for 3/8" over a 1" lug height track)
Hedgehog Carbide Tipped Trail Studs - H83C (1-1/8" lug track)
Hedgehog Carbide Tipped Trail Studs - H83C (1-1/8" lug track)
Our Price: $1.10

Snowstuds By Accord Hedgehog Studs - H83C (for 3/8" over a 1-1/8" lug height track)
Terminator 1/4" Conical Tip Studs - T100S
Terminator 1/4" Conical Tip Studs - T100S
Our Price: $1.10

Terminator 1/4" Conical Tip Studs - T100S These are solid steel studs intended for ice racing only, feature a razor sharp 30 degree conical point and a 3/4" head most commonly used for cleated tracks.   Approximate overall length of the stud and head is 1.270.  Includes nyloc steel nut.
Terminator 1/4" Flat Face Chipper Tooth Studs - T1100CS
Terminator 1/4" Flat Face Chipper Tooth Studs - T1100CS
Our Price: $1.10

Terminator 1/4" Flat Face Chipper Tooth Studs - T1100CS  These are solid steel studs intended for ice racing only, feature a back cut flat end with a machined face (chipper tooth) and a 3/4" head most commonly used for cleated tracks.  Approximate overall length of the stud and head is 1.355.  Includes nyloc steel nut.
Terminator 7mm Conical Tip Studs - T1100S
Terminator 7mm Conical Tip Studs - T1100S
Our Price: $1.10

Terminator 7mm Conical Tip Studs - T1100S These are solid steel studs intended for ice racing only, feature a razor sharp 30 degree conical point and a 7/8" head for rubber tracks.  Approximate overall length of the stud and head is 1.375.  Includes nyloc steel nut.
Terminator 7mm Flat Face Chipper Tooth Studs - T118CS
Terminator 7mm Flat Face Chipper Tooth Studs - T118CS
Our Price: $1.10

Terminator 7mm Flat Face Chipper Tooth Studs - T118CS  These are solid steel studs intended for ice racing only,  feature a back cut flat end with a machined face (chipper tooth) and a 7/8" head for rubber tracks.  Approximate overall length of the stud and head is 1.490.  Includes nyloc steel nut.
Terminator 7mm Flat-Face Conical Tip (Shovel Tip) Studs - T118SX
Terminator 7mm Flat-Face Conical Tip (Shovel Tip) Studs - T118SX
Our Price: $1.10

Terminator 7mm Flat-Face Conical Tip (Shovel Tip) Studs - T118SX  These are solid steel studs intended for ice racing only, feature a razor sharp 30 degree cone point with a machined shovel face and a 7/8" head for rubber tracks.  Approximate overall length of the stud and head is 1.465.  Includes nyloc steel nut.
Terminator 7mm Flat Face Chipper Tooth Studs - T125CS
Terminator 7mm Flat Face Chipper Tooth Studs - T125CS
Our Price: $1.10

Terminator 7mm Flat Face Chipper Tooth Studs - T125CS  These are solid steel studs intended for ice racing only,  feature a back cut flat end with a machined face (chipper tooth) and a 7/8" head for rubber tracks.  Approximate overall length of the stud and head is 1.560.  Includes nyloc steel nut.
Terminator 7mm Conical Tip Studs - T125S
Terminator 7mm Conical Tip Studs - T125S
Our Price: $1.10

Terminator 7mm Conical Tip Studs - T125S These are solid steel studs intended for ice racing only, feature a razor sharp 30 degree conical point and a 7/8" head for rubber tracks.  Approximate overall length of the stud and head is 1.575.  Includes nyloc steel nut.